TnppIdPage

		Try out our new .NET Telephony Toolkit called CTI32. It is easy to build telephone applications using VB.NET or C#. NO PORT ROYALTIES.

TnppIdPage

If you want to send a TNPP Id style page with no predefined users at the server, then use this command. This command assumes that there are no predefined users or paging services defined at the server. You will pass in all necessary information to send a page.

Example

NTPAGER TnppIdPage -AreaCode"602" -AccessNumber"5551212"
-Baud"1200" -TnppSourceId"1A20" -TnppDestId"2343" -Pin"12345678"
-TnppFunction"4" -Message"This is the message to send"

Note: Assumes that you have previously used the SetDefault command to set default values needed for communication with the NTpage Server.

Required parameters
   AreaCode
   AccessNumber
   Baud
   TnppSourceId
   TnppDestId
   TnppInertia
   Pin
   TnppFunction
   Message

Optional parameters
   ConnectWaitTime
   Email
   EmailError
   WhereTo
   From
   Subject
   PageDelay
   IpAddress
   NamedPipeAddress
   DebugFile