|
| |
Details on the Dialing Tab for Server Configuration in NTpage Administrator.
| - Your local area code is
- Enter your local area code or if there are multiple local area codes enter each area code separated by a comma (without any spaces). Example: 602,520
|
| - Dial area code when making a local call
- Normally this option is not checked. However in some areas of the world it is now required to include the area code when making a local call. If you need the area code included when NTpage makes a local call, check this option.
|
| - Allow long distance calls
- NTpage can prevent users from making any long distance calls. When this option is NOT checked NTpage will never dial any paging services that are long distance. This option was enabled to prevent users from using the NTpage API or NTpager.exe command line utility to send pages that dynamically add paging services that are long distance calls.
|
| - To access an outside line, first dial
- Enter what number(s) need to be dialed to get an outside line.
|
| - for local
- Enter what number(s) need to be dialed for a local call.
|
| - for long distance
- Enter what number(s) need to be dialed for a long distance call.
|
| - If this is a long distance call, dial - put the numbers in to dial a long distance call. This is normally only a 1.
|
| - After dialing phone number, dial XXX for local
- after dialing the number for a local call also dial this number.
|
| - for long distance
- after dialing the phone number for a long distance call also dial this number.
|
|
